REM

Gosh iFixit, are you still on iPhones? Didn't you finish that teardown? Well, yes. But the truth is, we still had two questions left unanswered:

  1. How exactly did Apple implement the highly touted 3D Touch feature?
  2. What will that do to the screen repair procedure?

To satisfy our curiosity, we cut, pried, hot-wired, and scraped at the display assembly of our brand-new iPhone 6s, and examined the entrails for signs and portents.

Here's what we found:

• The 3D Touch sensor assembly lives on the very back of the display panel, and is fairly easily separated from the backlight, display, and digitizer glass.

• The home button cable has been replaced by traces along the side of the 3D Touch sensor panel, eliminating the need to transfer the cable for certain display repairs.

• The sensor panel is a grid of rectangular capacitor plates, connected to the controller IC by very tiny traces. These plates would be huge for a touch sensor—luckily their job isn't to pinpoint your fingertip on the screen, as the in-screen digitizer will still handle that. These sensors measure the distance to your finger, equating to the force of a press through pliable glass.

Not satisfied with the highlights? Wander on over to the full teardown for all the details.